top of page

WEARABLE HEAT FLUX SENSING

Wearable Heat Flux Sensors for Core Body Temperature & Calorie Burn

Measure the heat the body gives off, not just skin temperature.

Heart rate and motion only estimate what the body is doing. A FluxTeq heat flux sensor measures the heat leaving the skin directly, in W/m², with skin temperature at the same spot. It is 380 microns thick, flexible, and reads wirelessly on a PocketDAQ.

FluxTeq PocketDAQ wireless heat flux and temperature DAQ for wearable sensing

What you can measure

One thin sensor on the skin gives two signals at the same spot: heat flux and temperature. Here is what researchers and product teams do with them.

Core body temperature

Skin heat flux and skin temperature are the inputs to non-invasive core temperature estimation, including zero-heat-flux and dual-heat-flux methods. Follow core temperature through exercise, sleep and recovery with no ingestible pill or probe.

Calorie burn and energy expenditure

The energy a body uses leaves as heat. Skin heat flux gives energy-expenditure models a direct thermal measurement to work from, instead of an estimate built on heart rate and motion alone.

Heat stress and firefighter safety

Under turnout gear, uniforms or protective suits, a thin sensor shows how much heat reaches the skin and how well the body sheds it. Made for heat-strain studies and for testing protective and cooling garments.

Measured on a real workout

200 W/m²

average heat flux leaving the skin

40 min

elliptical workout

≈ 260

calories over the workout

A FluxTeq PHFS sensor worn between two layers of athletic fabric, the way it would sit inside a garment.

FluxTeq PHFS-01 thin-film heat flux sensor for wearable measurements

Start measuring for $299

One PHFS-01 heat flux sensor ($110) and one PocketDAQ ($189). Tape the sensor on, open the app in Chrome or Edge, and watch heat flux and temperature live.

 

• Flexible film sensor, 380 microns thick, with a built-in Type-T thermocouple

• Pocket-sized, rechargeable 24-bit DAQ with wireless data

• Runs on a laptop, Chromebook or Android device; nothing to install

• Every run saves as a CSV file

• NIST-traceable calibration, with an individual sensitivity for each sensor

Designing it into a product?

PHFS-OEM sensors are $70 each in packs of four, with volume pricing. FluxTeq also makes custom sizes and shapes for straps, patches and garments, and can supply sensors in production quantities.

Questions about wearable heat flux sensing

 

Can a heat flux sensor measure core body temperature?

Not by itself. It measures the heat flux leaving the skin and the skin temperature. Core body temperature is estimated from those two measurements with a heat-balance model. PocketDAQ reports heat flux and temperature; the core temperature calculation is done in your own analysis.

 

How is the sensor worn?

The PHFS-01 is a flexible film 380 microns thick. It can be taped to the skin, held under a strap or armband, or placed between fabric layers. Smaller and custom-shaped sensors are available.

 

What do I need to get started?

One PHFS-01 sensor ($110) and one PocketDAQ ($189), $299 in total, plus a laptop, Chromebook or Android device running Chrome or Edge.

 

Can FluxTeq supply sensors for a wearable product?

Yes. The PHFS-OEM is $70 per sensor with a minimum order of four and lower pricing at volume, and custom sensor sizes and shapes are available.

 

Are these medical devices?

No. FluxTeq sensors and DAQs are measurement tools for research and product development. They are not medical devices and are not intended to diagnose or treat any condition.

 

Building a wearable or planning a study?

Tell us what you want to measure and we will recommend a sensor, size and DAQ.

FluxTeq sensors and DAQs are research and development tools. They are not medical devices.

bottom of page